First, the screws are loose and broken.

Fixed equipment like jaw crusher must be installed before manufacturing, and it should be fixed on the foundation when installing, and the screws should be used when fixing, and when one side of the screws is loose or broken during the manufacturing process, the machine will have a slight shaking, and the solution to the problem is to tighten or change the loose or broken screws in time so that the jaw crusher can be firmly fixed on the foundation, and thus The jaw crusher can be firmly fixed on the foundation so that it can carry out the crushing work smoothly;

Second: Fly chute wheel disengaged from its original position

The fly slot wheel is a key component of the jaw crusher, and when it is installed, its position in the equipment is unchanged, but during the installation process, due to the operator's operation error, it will cause this component to be offset, resulting in the machine's center of gravity is unstable, which produces the shaking, the way to deal with such a situation is to: adjust the installation position of the fly slot wheel;

This article focuses on the two main reasons for the shaking of the jaw crusher, one is related to the screws, and the other is related to the position of the fly groove wheel, about the treatment of these two problems, the above has also been done in detail, only to deal with the problems generated by the machine in the process of production, in order to ensure that the machine is stable and improve the efficiency of production.